Share :
You are here:
Xenomorph Mod for Alien
€110,00
3D Xenomorph Mod for the Pinball Brothers Alien pinball machine, designed to add the iconic creature directly to the playfield and enhance the machine’s immersion.
Reversible installation: The mod uses an existing attachment point on the playfield. Install the spacer, position the Xenomorph, then secure it with the supplied screw. No drilling or gluing is required.
Ready-to-install kit: The screws and spacers required for installation are supplied with the mod.
Package contents:
- 1 x 3D Xenomorph Mod for Alien pinball
- Mounting spacer and hardware
👉 See the long description for detailed installation instructions.
Each example is handcrafted and unique.
Customisation on request: Colours and certain design details can be adapted on request to match your machine and pinball theme perfectly.
Please contact us before ordering to discuss your customisation.
Description
3D Xenomorph Mod for Alien Pinball – Bring the creature onto your playfield
Was something missing from your Alien pinball machine?
Probably an extra extraterrestrial creature ready to watch you throughout the entire game.
With this 3D Xenomorph Mod for Alien pinball,
add one of science fiction and horror’s most iconic creatures directly to the playfield.
Represented in three dimensions,
the Xenomorph immediately adds more volume,
depth and realism to the playfield.
Its dark silhouette,
elongated skull
and biomechanical appearance blend naturally into the machine’s oppressive atmosphere.
Once installed,
the mod truly gives the impression that the creature has entered the pinball machine.
Which, in the Alien universe,
is rarely the start of an excellent day.
Designed especially for the Alien pinball machine
This mod is intended for the
Alien pinball machine by Pinball Brothers.
Its mounting system uses an existing attachment point on the playfield,
allowing a clean installation without drilling or permanently modifying the machine.
The position was chosen to integrate the Xenomorph naturally into the scenery
while preserving the normal operation of the playfield.
The creature therefore becomes a genuine part of the scene rather than a simple figurine placed on the playfield.
A 3D sculpture inspired by the Alien universe
The Xenomorph is particularly well suited to a three-dimensional creation.
Its silhouette,
limbs,
pose and biomechanical textures make it possible to create a mod rich in relief.
Each piece is made to order, then individually prepared and painted.
The finishing work brings out the sculpture’s volumes
and its dark, organic appearance under the playfield lighting.
The result is deliberately consistent with the machine’s aesthetic:
dark,
unsettling
and discreet enough that you only notice it half a second before it is far too late.
Screws and spacers supplied
You do not need to search for the hardware required for installation.
The mod is supplied with
the screws and spacers intended for its installation.
The system uses a spacer to position the figurine correctly above the attachment point,
then a suitable screw holds the Xenomorph in place.
This solution ensures a clean,
stable and fully reversible installation.
Detailed installation of the Xenomorph Mod
Installation remains relatively simple and does not require any permanent modification of the playfield.
Simply take your time so that you handle the components around the mounting area correctly.
- Switch the pinball machine off completely and unplug it before carrying out any work.
- Remove the lockbar, then carefully slide out the glass to access the playfield.
- Locate the attachment point intended for installing the Xenomorph.
- Carefully remove the original hardware fitted at this location.
- Keep the original components so that the machine can later be returned to its original configuration.
- Install the supplied spacer on the attachment point.
- Then position the Xenomorph Mod on the spacer, observing its orientation.
- Insert the supplied screw, then tighten it gradually to hold the figurine in place.
- Do not overtighten: the mod must be stable without placing unnecessary stress on the part or its support.
- Check that the Xenomorph does not touch any ramp, moving mechanism or ball path.
- Check the stability of the entire assembly one final time.
- Replace the glass, then the lockbar.
No drilling,
no gluing
and no permanent transformation of your Alien machine are required.
The installation remains entirely reversible.
The operation is therefore much less dangerous than it looks:
you really are installing a Xenomorph in your machine,
but fortunately it comes with screws rather than a Facehugger.
Why choose this Xenomorph Mod for Alien?
- Iconic creature: adds a 3D Xenomorph directly to the playfield.
- Designed for Alien: integration specifically created for the Pinball Brothers pinball machine.
- 3D effect: adds more volume and depth to the scenery.
- Clean installation: uses an existing attachment point.
- Hardware supplied: screws and spacers required for installation are included.
- No permanent modification: no drilling or gluing.
- Reversible installation: the original configuration can be restored.
- Handcrafted production: each piece is made to order, then individually prepared and painted.
Package contents:
- 1 x 3D Xenomorph Mod for Alien pinball
- Mounting spacer
- Hardware required for installation
Note:
Each mod is made to order, then individually prepared and painted.
Slight variations may appear in the shades,
contrasts or certain finishing details.
These characteristics reflect the handcrafted work carried out on each piece
and help make every example unique.
