Oxygen Tank Mod for JAWS

Oxygen Tank Mod for JAWS pinball – A cult detail directly on your playfield

Add an instantly recognizable nod to the film with this
Oxygen Tank Mod for JAWS pinball.
Inspired by one of the most memorable objects from the final confrontation with the shark,
this tank adds depth,
realism
and an extra little dose of immersion to your playfield.

The mod was designed to fit naturally on the
left slingshot of the JAWS pinball machine,
but its deliberately simple mounting system also allows it to be installed
in different places on the playfield according to your preferences.

After all,
if you know JAWS,
you know that an oxygen tank left near a shark
rarely ends up being used only for breathing.

An iconic element from the JAWS universe

The oxygen tank is an essential reference to the original film.
Integrating it onto the playfield therefore adds an element immediately associated with the JAWS universe
without changing the machine’s overall aesthetic.

Thanks to its compact size,
it completes the scenery without hiding important playfield elements.
Installed on the left slingshot,
it blends naturally into the scene.
However,
you remain completely free to choose another compatible location.

Position it freely according to your preferences

The mod is supplied with
double-sided adhesive
for a simple,
quick installation
without complex disassembly.

You can therefore position the tank on the left slingshot,
its recommended location,
or choose another sufficiently flat and unobstructed area of the playfield.

Before removing the backing from the double-sided adhesive,
we recommend testing several positions without fixing it.
This allows you to check the orientation,
visibility
and, above all, the absence of interference with the ball or the pinball mechanisms.

In short,
you can move the tank wherever you want before sticking it down.
Afterwards,
as in the film,
it is better to have thought carefully about where you put it.

Ultra-simple installation with double-sided adhesive supplied

No drilling,
no screws
and no permanent modification of the playfield are required.

1. Switch off your pinball machine before any handling.
2. Remove the lockbar, then slide out the playfield glass.
3. Choose the desired location. The left slingshot is the recommended position.
4. Test the position without fixing it to check how the mod fits.
5. Make sure the tank does not obstruct any ball path, ramp or moving part.
6. Clean the surface carefully to remove dust and greasy marks.
7. Allow the area to dry completely.
8. Apply the supplied double-sided adhesive to the mod if it is not already in place.
9. Remove the adhesive backing, then carefully place the tank in the chosen location.
10. Apply steady pressure for a few seconds to ensure good adhesion.
11. Check the mod’s stability one final time before replacing the glass and lockbar.

For optimal hold,
avoid repositioning the double-sided adhesive several times after its final application.

Why choose this JAWS Oxygen Tank Mod?

• Iconic reference: inspired by a cult element from the JAWS film.
• Recommended location: perfectly suited to the left slingshot.
• Customizable positioning: can be installed elsewhere on the playfield.
• Easy installation: attaches with the supplied double-sided adhesive.
• No drilling: no complex modification of the machine.
• 3D effect: adds more volume and realism to the playfield.
• Handcrafted production: each piece is made to order, then prepared individually.

Package contents:

• 1 x Oxygen Tank Mod for JAWS pinball
• Double-sided adhesive for installation

Note:
Each mod is made to order, then prepared individually.
Slight variations may appear in the shades or certain finishing details.
These particularities reflect the handcrafted work carried out on each piece
and help make every example unique.