Engraved Wooden Shooter Plate Mod for Winchester

Engraved Wooden Shooter Plate Mod for Winchester Pinball

Add a touch of Victorian mystery to your Winchester pinball machine with this engraved and varnished wooden shooter plate mod, specially designed to decorate the front of the cabinet around the ball shooter. Inspired by the mysterious Winchester Mystery House, this decorative accessory combines antique ornaments, a mysterious keyhole and the inscription “ENTER IF YOU DARE”.

With its engraved wood, dark decorative patterns and protective clear varnish finish, this plate adds a warm and authentic touch to your machine. Furthermore, its self-adhesive backing allows for easy installation without drilling or modifying the cabinet.

And in the Winchester universe, “Enter If You Dare” is probably the least reassuring invitation you could ever receive. Especially in a house where some doors lead absolutely nowhere.

A Design Inspired by the Winchester Mystery House

The Winchester Mystery House, located in California, is famous for its unusual architecture, mysterious staircases, unexpected passages and the numerous legends surrounding its construction.

This shooter plate incorporates decorative elements inspired by the Victorian era, extending this mysterious atmosphere to the front of your pinball machine.

Its design combines several distinctive features:

• Victorian ornaments: Decorative scrollwork, floral patterns and details engraved directly into the wood.
• A central keyhole: Symbolizing the many mysterious doors and passages throughout the mansion.
• The inscription “ENTER IF YOU DARE”: An invitation that immediately sets the mood.
• Dark engravings: Contrasting with the natural color of the wood to highlight the details of the design.
• A circular opening: Allowing the shooter rod to pass through.

The result resembles an antique decorative plate that could have been discovered on one of the countless doors of the Winchester Mystery House.

Fortunately, this version shouldn’t add any new corridors to your gameroom. With the real house, however, you never know where things might lead.

A Genuine Engraved and Varnished Wooden Plate

Unlike a simple printed sticker, this Winchester shooter plate mod is made from genuine wood, with the decorative patterns and lettering engraved directly into the material.

The engraving creates natural contrasts between the lighter areas of the wood and the darker sections of the design. The scrollwork, ornaments and lettering therefore stand out clearly without requiring colored printing.

After engraving, we apply a protective clear varnish finish that protects the surface and enhances the natural appearance of the wood.

This finish also provides a carefully crafted, slightly glossy appearance while preserving the natural character of the material.

Furthermore, each plate has its own natural shades and wood grain. These variations give every piece a slightly different appearance.

A Decoration Perfectly Suited to Winchester

This engraved wooden shooter plate was designed to complement the theme of the Winchester pinball machine and its universe inspired by the famous mysterious mansion.

It decorates the area surrounding the shooter rod, directly on the front of the cabinet. This transforms an otherwise understated location into a genuine decorative feature.

Its central opening allows the shooter rod to pass through while preserving the normal operation of the launching mechanism.

Furthermore, this plate naturally complements other Winchester accessories in our collection, particularly the antique door handle-inspired shooter knob and the engraved wooden Finger Stickers.

You can therefore create a consistent decorative theme across the shooter, cabinet front and playfield flippers.

A Carefully Crafted Handmade Finish

At Pinball Custom, we pay particular attention to the engraving and finishing of every plate.

The Victorian patterns contain numerous small details. We therefore carefully work on the contours, lettering and contrasts to ensure the entire design remains clearly visible.

The protective varnish is then applied to complete the piece, protecting the wooden surface while enhancing its natural color.

The finished product deliberately retains the authentic appearance of the material. We do not attempt to conceal the wood grain or its natural variations, as these characteristics are precisely what give each piece its charm.

After all, a house as mysterious as Winchester deserves something better than a perfectly standardized decoration.

Easy Installation with Self-Adhesive Backing

The Winchester shooter plate features a self-adhesive backing that allows it to be installed directly onto the front of your pinball cabinet.

No drilling is required. However, depending on the size of your shooter knob, you may need to temporarily remove it to slide the plate over the shooter rod.

Step 1 – Prepare the Surface

1. Completely switch off your pinball machine before beginning any work.
2. Identify the area surrounding the ball shooter.
3. Carefully clean the cabinet front using a soft cloth and a cleaning product compatible with its finish.
4. Remove dust, grease and any remaining cleaning product residue.
5. Allow the surface to dry completely before beginning installation.

Tip: A clean, dry surface promotes better adhesion. Take a few moments to prepare the cabinet front properly.

Step 2 – Check the Positioning

1. Hold the plate against its intended location without removing the protective adhesive backing.
2. Check that the circular opening matches the position of the shooter rod.
3. Check that the plate is properly centered and that the inscription “ENTER IF YOU DARE” is correctly aligned.
4. Make sure the plate sits properly against the cabinet front.
5. If the shooter knob prevents the plate from fitting over the rod, temporarily remove it according to your machine’s mounting system.

This preliminary check helps prevent positioning mistakes once the adhesive has been exposed.

Step 3 – Attach the Engraved Wooden Plate

1. Carefully remove the protective adhesive backing.
2. Position the plate around the shooter rod.
3. Carefully align the edges and inscription.
4. Gradually apply the plate against the cabinet front.
5. Apply gentle, even pressure to promote adhesion.
6. Check that the plate remains correctly positioned.
7. If you removed the shooter knob, reinstall it.

Important: Avoid repeatedly removing and reapplying the plate, as this could reduce the effectiveness of the adhesive.

Step 4 – Check Shooter Operation

1. Gently operate the shooter several times.
2. Check that the rod slides freely through the opening.
3. Make sure the plate does not interfere with any moving components.
4. Check that the adhesive attachment remains secure.
5. Switch your pinball machine back on and enjoy its new decoration.

And that’s it! Your shooter now features its very own invitation to enter the Winchester Mystery House. However, we’ll leave you entirely responsible for whatever might be waiting behind the door.

Specifications:

• Product: Engraved Wooden Shooter Plate Mod for Winchester Pinball
• Compatibility: Winchester pinball machine
• Material: Genuine wood
• Decoration: Patterns engraved directly into the wood
• Finish: Protective clear varnish
• Design: Victorian ornaments and antique keyhole
• Inscription: ENTER IF YOU DARE
• Opening: Circular cutout for the shooter rod
• Attachment: Self-adhesive backing
• Installation: Directly onto the front of the pinball cabinet
• Modification: No drilling required

Why Choose This Winchester Shooter Plate?

• Genuine wood: Natural material with its own distinctive grain.
• Detailed engraving: Victorian ornaments and lettering engraved directly into the wood.
• Protective varnish finish: Protects the surface and enhances the natural material.
• Immersive design: Mysterious keyhole and the inscription “ENTER IF YOU DARE”.
• Self-adhesive installation: Easy attachment without drilling.
• Consistent customization: Complements other engraved wooden Winchester accessories.
• Handcrafted finish: Each piece features the natural variations of genuine wood.

Package Contents:

• 1 x Engraved Wooden Shooter Plate Mod for Winchester Pinball, varnished and self-adhesive

Important: This plate decorates the area around the existing shooter. Depending on the dimensions of your shooter knob, temporary removal may be necessary to install the plate. The shooter knob itself is not included.

Note: Wood is a natural material. Slight variations in color, grain and engraving contrast may occur between individual pieces. These differences contribute to the authentic character of each plate.

With this Engraved Wooden Shooter Plate Mod for Winchester Pinball, add a genuine Victorian touch to the front of your machine. Natural wood, detailed engravings, a mysterious keyhole and an invitation to enter: everything you need to extend the Winchester Mystery House atmosphere down to the smallest details.