Engraved Wooden Flipper Stickers Mod for Winchester

Engraved Wooden Flipper Stickers Mod for Winchester Pinball

Add a touch of Victorian mystery to the flippers of your Winchester pinball machine with this set of 4 engraved and varnished wooden flipper stickers. Inspired by the mysterious universe of the Winchester Mystery House, these decorative accessories combine antique ornaments, dark engravings and four iconic designs: YES, NO, the number 13 and an antique key.

Each sticker features its own illustration, engraved directly into genuine wood. The flippers therefore become small decorative elements that extend the atmosphere of the machine right onto the playfield.

And in a house where some doors open onto walls, staircases lead nowhere and the number 13 appears everywhere, having YES and NO written directly on the flippers actually makes perfect sense. The only question is whether the house will accept your answer.

Four Designs Inspired by the Mysteries of Winchester

This Winchester flipper sticker set includes four different pieces, each featuring a design engraved directly into the wood.

• YES: Accompanied by a sun with an expressive face and floral ornaments. This bright symbol contrasts with the mysterious atmosphere of the mansion.
• NO: Decorated with an antique-style moon face, surrounded by small stars and Victorian scrollwork.
• 13: The famous number associated with the many legends of the Winchester Mystery House, presented inside an ornamental medallion.
• Antique Key: A finely engraved key evoking the secret doors, locks and mysterious passages of the house.

Thanks to this combination, you can customize all four flippers while maintaining a consistent visual style across the entire set.

The designs naturally complement one another, creating a small collection of symbols inspired by the Winchester universe.

Genuine Wood, Engraved and Protected with a Clear Varnish Finish

Unlike ordinary printed stickers, these Winchester flipper stickers are made from genuine wood.

We engrave the lettering, symbol outlines and numerous decorative ornaments directly into the material. This engraving creates a natural contrast between the lighter areas of the wood and the darker engraved designs.

We then apply a protective clear varnish finish to protect the surface and enhance the natural color of the wood.

This finish also provides a carefully crafted, slightly glossy appearance while preserving the authentic character of the material.

Furthermore, each piece features its own wood grain and natural shades. These subtle differences contribute to the charm of the product and make every set slightly unique.

Customization Faithful to the Winchester Universe

These engraved wooden flipper sticker mods were designed to complement the Winchester pinball machine and its universe inspired by the famous mysterious mansion.

The four designs incorporate several characteristic elements of this theme: the number 13, antique keys, mysterious symbols and Victorian ornaments.

Furthermore, the stickers naturally complement our Engraved Wooden Shooter Plate Mod for Winchester Pinball, which features the same decorative style with its keyhole and the inscription “ENTER IF YOU DARE”.

You can also combine them with a custom shooter knob inspired by an antique door handle. Together, these accessories create a consistent decorative theme between the cabinet front and the playfield.

With a keyhole on the cabinet, a key on one flipper and the number 13 on another, your pinball machine seriously starts to resemble a Victorian puzzle. Fortunately, you won’t need a map of the mansion to start a game.

A Carefully Crafted Handmade Finish

At Pinball Custom, we prepare each Winchester flipper sticker set with particular attention to engraving and finishing.

The designs contain numerous small details. We therefore carefully work on the outlines, lettering and contrasts to ensure that the illustrations remain clearly visible.

The protective varnish is then applied to protect the wooden surface and enhance its natural appearance.

We deliberately preserve the natural shades and wood grain of the material. As a result, every set has subtle individual characteristics that reflect the authentic nature of the wood.

After all, in a house as mysterious as Winchester, four perfectly identical pieces without any personality would almost seem suspicious.

Easy Installation of the Wooden Flipper Stickers

These engraved wooden stickers for Winchester pinball attach directly to the original flippers. Installation does not require dismantling the flipper mechanisms.

For a clean and durable result, we recommend carefully preparing the surfaces and checking the arrangement of all four designs before attaching them.

Step 1 – Prepare Your Pinball Machine

1. Completely switch off your pinball machine before beginning any work.
2. Remove the lockdown bar, then carefully slide out the playfield glass.
3. Place the glass in a clean, safe location.
4. Identify the four flippers that will receive the stickers.
5. Carefully clean their surfaces using a soft cloth and a compatible cleaning product.
6. Remove dust, greasy marks and any remaining cleaning product residue.
7. Allow the surfaces to dry completely before continuing.

Tip: A clean, dry surface promotes good adhesion. Take a few moments to prepare the flippers properly.

Step 2 – Choose the Arrangement of the Four Designs

1. Place the four stickers on a clean surface.
2. Identify the YES, NO, 13 and Antique Key designs.
3. Test-fit each piece on its corresponding flipper.
4. Check the orientation of the engravings and their alignment with the shape of the flipper.
5. Choose the arrangement that best complements your machine’s decoration.
6. If desired, take a photograph to keep as a reference before installation.

This allows you to create a harmonious composition and arrange the different symbols according to your preferences.

And if you’re hesitating between YES and NO, don’t worry: at the Winchester Mystery House, even the architects sometimes seemed to have trouble making up their minds.

Step 3 – Attach the Engraved Wooden Stickers

1. Check one final time that the flippers are perfectly clean and dry.
2. Carefully remove the protective backing from the first sticker’s adhesive surface.
3. Position the sticker on the flipper according to your chosen alignment.
4. Apply gentle, even pressure to promote adhesion.
5. Check that the edges remain securely attached.
6. Repeat the process for the remaining three stickers.

Important: Avoid repeatedly removing and reapplying the stickers, as this could reduce the effectiveness of the adhesive.

Step 4 – Check Flipper Operation

1. Check that each sticker remains securely attached.
2. Make sure no edges extend into an area that could interfere with gameplay.
3. Ensure that the flippers can move normally.
4. Also check that the stickers do not touch any nearby components.
5. Reinstall the playfield glass and lockdown bar.
6. Switch your pinball machine back on and check that the flippers operate correctly.

And that’s it! Your flippers now feature their own mysterious symbols. YES, NO, 13 and a key: all that’s missing is a secret door to complete the puzzle.

Specifications:

• Product: Engraved Wooden Flipper Stickers Mod for Winchester Pinball
• Compatibility: Winchester pinball machine
• Quantity: Set of 4 pieces
• Material: Genuine wood
• Decoration: Designs engraved directly into the wood
• Finish: Protective clear varnish
• Designs: YES, NO, 13 and Antique Key
• Style: Victorian ornaments, sun, moon and mysterious symbols
• Attachment: Self-adhesive backing
• Installation: Directly onto the original flippers
• Modification: No dismantling of the flipper mechanisms required

Why Choose These Winchester Flipper Stickers?

• Four different designs: YES, NO, 13 and Antique Key for complete customization.
• Genuine wood: Natural material with its own distinctive grain.
• Detailed engraving: Victorian designs engraved directly into the wood.
• Protective varnish finish: Protects the surface and enhances the natural material.
• Self-adhesive installation: Easy attachment to the original flippers.
• Immersive design: Extends the Winchester Mystery House universe onto the playfield.
• Consistent customization: Complements the engraved wooden Winchester shooter plate.

Package Contents:

• 1 x YES engraved wooden flipper sticker
• 1 x NO engraved wooden flipper sticker
• 1 x 13 engraved wooden flipper sticker
• 1 x Antique Key engraved wooden flipper sticker

Important: These stickers are designed to decorate the original flippers of the Winchester pinball machine. Check their positioning before attachment and avoid applying excessive pressure to the wooden elements.

Note: Wood is a natural material. Slight variations in color, grain and engraving contrast may occur between individual pieces. These differences contribute to the authentic character of each sticker.

With this Engraved Wooden Flipper Stickers Mod for Winchester Pinball, add a touch of Victorian mystery to your machine. Natural wood, detailed engravings, four iconic symbols and a protective varnish finish: everything you need to extend the Winchester Mystery House atmosphere right to your fingertips. And if the house asks you to choose between YES and NO, think carefully before answering!