Elvira Clown Shooter Knob

Horror Clown Shooter Knob for Elvira Pinball – The Circus Just Became a Lot Less Welcoming

Add another delightfully disturbing creature to your machine with this
Clown Shooter Knob for Elvira Pinball.
Featuring a terrifying clown with a distinctly unsettling smile,
this Shooter Knob fits perfectly into Elvira’s quirky,
macabre and deliberately over-the-top universe.

Its white face is combined with
purple and pink makeup,
a large red nose,
green eyes,
textured pink hair
and a small purple hat.
But it is obviously the wide smile,
irregular teeth
and bloody effects around the mouth
that ultimately give this character its full personality.

The result sits exactly somewhere between a carnival clown and the very bad idea of staying alone in a circus after midnight.
In other words:
perfect for Elvira.

Designed for the Elvira pinball universe

This Shooter Knob was designed to complement machines inspired by the world of Elvira,
where horror,
monsters,
kitsch
and dark humor happily coexist.

Its colorful aesthetic preserves the fun side of the machine
while adding a genuine touch of horror.
The clown is deliberately extravagant:
it immediately catches the eye
and transforms the original Shooter Knob into a genuine decorative element.

It will naturally find its place on
Elvira’s House of Horrors (Stern),
but its style can also suit other custom projects inspired by clowns,
carnivals,
circuses or horror.

A particularly expressive 3D sculpture

The head is entirely sculpted in three dimensions to highlight the character’s numerous details.
The forehead,
cheeks,
ears,
hair,
nose
and mouth all feature their own raised details,
creating a particularly expressive sculpture under the gameroom lighting.

The large green eyes contrast strongly with the purple makeup,
while the glossy red nose immediately catches the eye.
The mouth receives a much darker and more disturbing finish,
with deliberately irregular teeth
and bloody effects that reinforce its horrific appearance.

The small purple hat and ruffled collar complete the silhouette
and give it the genuine appearance of a circus clown…
if the circus in question clearly had a few issues with its health and safety department.

Handcrafted and hand-painted

Each Elvira Clown Shooter Knob
is made to order and then individually hand-painted.

The different colors are applied to highlight the sculpted details:
white for the face,
pink for the hair,
purple for the makeup,
green for the eyes
and red for the various details.

The shading,
depth effects
and bloody marks are also individually created.
This handcrafted production means that slight variations may occur from one piece to another,
particularly in the shades and placement of the painted effects.

That’s probably a good thing:
if two clowns like this were absolutely identical,
things would honestly start getting a little worrying.

A spectacular yet fully functional Shooter Knob

Despite its level of detail,
this mod remains above all a
fully functional pinball Shooter Knob.
Its shape maintains a comfortable grip
and preserves the normal operation of the launching mechanism.

You can therefore grab the clown,
pull back the Shooter Knob
and send the ball onto the playfield.
A sentence we probably never imagined we would have to write,
but one that works surprisingly well in Elvira’s universe.

Detailed Shooter Knob installation

Replacing the original Shooter Knob is simple
and generally takes only a few minutes.
No permanent modification to the machine is required.

1. Turn off your pinball machine before beginning any work.
2. Open the coin door to access the inside of the cabinet.
3. Locate the rear of the shooter rod.
4. Hold the rod securely to prevent it from rotating during removal.
5. Carefully unscrew the original Shooter Knob by turning it counterclockwise.
6. Completely remove the existing Shooter Knob.
7. Screw your new Elvira Clown Shooter Knob onto the original thread.
8. Orient the clown so that its face is correctly positioned.
9. Tighten firmly by hand without applying excessive force.
10. Operate the Shooter Knob several times to make sure the rod slides freely and returns correctly to its position.

The installation remains completely reversible.
Simply keep your original Shooter Knob
if you wish to return your machine to its original configuration at a later date.

Why choose this Elvira Clown Shooter Knob?

• Horrific and quirky design: perfectly suited to the Elvira universe.
• 3D sculpture: face, hair, makeup, teeth and ruffled collar entirely sculpted in relief.
• Colorful finish: white, pink, purple, green and red create a spectacular contrast.
• Bloody details: deliberately macabre finish around the mouth.
• Quick installation: direct replacement for the original Shooter Knob.
• Reversible installation: no permanent modification to the machine.
• Handcrafted: each Shooter Knob is made to order and then individually hand-painted.

Package contents:

• 1 x Horror Clown Shooter Knob for Elvira Pinball

Note:
Each Shooter Knob is made to order and individually hand-painted.
Slight variations may occur in the shades,
shading,
bloody effects or certain finishing details.
These characteristics reflect the handcrafted work carried out on each piece
and help make every Shooter Knob unique.