Side art Willy Wonka
Select options This product has multiple variants. The options may be chosen on the product page

Side art Willy Wonka

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Wizard of Oz
Select options This product has multiple variants. The options may be chosen on the product page

Side art Wizard of Oz

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art World Cup Soccer 94
Select options This product has multiple variants. The options may be chosen on the product page

Side art World Cup Soccer 94

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art World poker tour
Select options This product has multiple variants. The options may be chosen on the product page

Side art World poker tour

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Wrestle mania
Select options This product has multiple variants. The options may be chosen on the product page

Side art Wrestle mania

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art X Files
Select options This product has multiple variants. The options may be chosen on the product page

Side art X Files

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art X-men
Select options This product has multiple variants. The options may be chosen on the product page

Side art X-men

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

X-men uncanny Stern pinball
Select options This product has multiple variants. The options may be chosen on the product page

Side art X-Men Uncanny (Stern)

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Simple Makeover Service – Pinball Figurine
Select options This product has multiple variants. The options may be chosen on the product page

Simple Makeover Service – Pinball Figurine

30,00€

Bring your figurine back to life:
This simple makeover service revives the colors and shine of your pinball figurine while respecting its original appearance.
A light and precise handcrafted touch to restore depth and brilliance to your playfield.

Included in the service:

  • Complete cleaning and preparation of the figurine
  • Light enhancement of original colors
  • Small manual touch-ups on fine details
  • Application of a protective matte, satin, or glossy varnish

Service process:
Send us your figurine carefully packed. We clean, restore, and hand-paint it using professional materials.
Once finished, we return it ready to be reinstalled on your pinball machine.

Customization options:

  • Choice of varnish finish: matte, satin, or glossy
  • Option for specific touch-ups based on your preferences

Each figurine is handcrafted in our workshop in France.
Price varies depending on the size and complexity of the piece.

Skull Island Waterfall Mod for King Kong
Add to basket

Skull Island Waterfall Mod for King Kong

130,00€

Bring a spectacular dimension to your King Kong pinball: This Skull Island Waterfall mod replaces the original plastic with a realistic 3D décor, featuring a transparent waterfall, stone and moss effects, and two integrated glowing eyes.

Package Contents:

  • 1 x Skull Island Waterfall Mod (stone/moss effect + transparent waterfall)
  • Integrated LED lighting (2 glowing eyes)
  • Wiring and original screws for installation

Easy installation: Simply remove the original plastic, screw the mod in place using the existing two screws, then connect the cable to the GI. Quick installation in under 5 minutes.

Note: Each mod is hand-painted and assembled. Slight variations in color or texture make every piece unique.

Skull Spider Mod
Add to basket

Skull Spider Mod

90,00€

Add a horrific touch to your Elvira pinball machines: This 3D spider with a skull-shaped body, hand-painted and varnished, blends perfectly into Elvira’s gothic and macabre universe.

Package Contents:

  • 1 x Skull Spider 3D Mod (hand-painted and varnished)
  • Fixing system (adhesive or screws depending on configuration)

Easy installation: Choose the ideal spot, secure the spider on the playfield or ramp, and enjoy a striking visual effect.

Note: Each piece is handcrafted; slight variations in color and finish make every item unique.

Skullcrawler Mod
Add to basket

Skullcrawler Mod

90,00€

Add a monstrous touch to your King Kong pinball: This hand-painted 3D Skullcrawler mod clips directly onto the ramp for a spectacular and immersive effect.

Package Contents:

  • 1 x Hand-painted and varnished 3D Skullcrawler Mod
  • Integrated metal clip for fixation

Easy installation: Position the mod on the ramp, gently open the metal clip, and secure it firmly. Quick setup, no tools required.

Note: Each piece is handcrafted; slight variations in color and finish make every item unique.

Slingshot Ghostbusters Mod
Add to basket

Slingshot Ghostbusters Mod

140,00€

Add a supernatural touch to your Ghostbusters pinball: These glossy transparent resin ghosts decorate the slingshots with a shiny and immersive effect, without interfering with gameplay.

Package Contents:

  • 2 x Slingshot Ghost Mods in glossy transparent resin
  • Fixings compatible with original slingshots

Easy installation: Remove the original slingshot plastics, attach the ghost mods using the existing screws, and enjoy a spectacular luminous effect.

Note: Each resin piece has slight variations, making every set unique.

Slingshot Mod – Indiana Jones
Add to basket

Slingshot Mod – Indiana Jones

150,00€

An ancient temple atmosphere: These 3D slingshots replace the original Indiana Jones pinball protectors. Sculpted with a stone effect and hand-painted, they feature LED eyes that light up as soon as the GI turns on.

Package contents:

  • 1 pair of stone-effect 3D slingshots
  • GI connection cables for the LED eyes

Easy installation: Remove the original parts, install the statues and connect the LEDs.
Each piece is handcrafted and unique.

Snake Ramp Clip Mod – King Kong
Add to basket

Snake Ramp Clip Mod – King Kong

90,00€

A wild and narrative detail: This Snake mod for King Kong pinball clips directly onto a ramp on the playfield. 3D printed and hand painted, it enhances the dangerous jungle atmosphere with effortless installation.

Package contents:

  • 1 x 3D printed and hand-painted Snake with integrated clip

Easy installation: Simply clip the snake onto the ramp of your choice, with no glue or screws required.

South Park Shooter Knob
Add to basket

South Park Shooter Knob

100,00€

Add a quirky touch to your pinball: This 3D Kenny Shooter Knob from South Park is hand-painted and varnished for a fun, one-of-a-kind look.

Box Contents:

  • 1 x 3D Kenny Shooter Knob (metal rod + varnished head)

Easy Installation: Remove the old knob, insert the new Kenny model, and attach the spring. The result is instant.

Note: Each piece is hand-painted, making every example unique and full of character.