Showing 1–16 of 253 results

Backboard Attack From Mars

45,0060,00

Easy to install : Installation of the backboard may require removal of some pinball components, depending on the model selected.

 

Package content :

  • 1 x Backboard in Plexiglas or vinyl

Note : Dimensions may vary slightly depending on the model and design chosen.

Backboard Dirty Harry

45,0060,00

Easy to install : Installation of the backboard may require removal of some pinball components, depending on the model selected.

 

Package content :

  • 1 x Backboard in Plexiglas or vinyl

Note : Dimensions may vary slightly depending on the model and design chosen.

Backboard Guardians of the galaxy

45,0060,00

Easy to install : Installation of the backboard may require removal of some pinball components, depending on the model selected.

 

Package content :

  • 1 x Backboard in Plexiglas or vinyl

Note : Dimensions may vary slightly depending on the model and design chosen.

Backboard Indiana Jones

45,0060,00

Easy to install : Installation of the backboard may require removal of some pinball components, depending on the model selected.

 

Package content :

  • 1 x Backboard in Plexiglas or vinyl

Note : Dimensions may vary slightly depending on the model and design chosen.

Backboard The Shadow

45,0060,00

Easy to install : Installation of the backboard may require removal of some pinball components, depending on the model selected.

 

Package content :

  • 1 x Backboard in Plexiglas or vinyl

Note : Dimensions may vary slightly depending on the model and design chosen.

Backboard The Shadow V2

45,0060,00

Easy to install : Installation of the backboard may require removal of some pinball components, depending on the model selected.

 

Package content :

  • 1 x Backboard in Plexiglas or vinyl

Note : Dimensions may vary slightly depending on the model and design chosen.

Backboard Tron

45,0060,00

Easy to install : Installation of the backboard may require removal of some pinball components, depending on the model selected.

 

Package content :

  • 1 x Backboard in Plexiglas or vinyl

Note : Dimensions may vary slightly depending on the model and design chosen.

Backboard Twilight Zone

45,0060,00

Easy to install : Installation of the backboard may require removal of some pinball components, depending on the model selected.

 

Package content :

  • 1 x Backboard in Plexiglas or vinyl

Note : Dimensions may vary slightly depending on the model and design chosen.

Backboard Twilight Zone V2

45,0060,00

Easy to install : Installation of the backboard may require removal of certain pinball components, depending on the model selected. The vinyl version requires more dexterity and preparation of the surface to ensure smoothness. The plexiglass version is easier to install, and requires no surface preparation.

 

Package content :

  • 1 x Backboard in Plexiglas or vinyl

Note : Dimensions may vary slightly depending on the model and design chosen.

Panel Godzilla premium

60,00

Easy to install : Panel installation is child’s play with Magnetic Ultra Gloss material: simply position it on the panel.

 

Package contents :

  • 1 x high-gloss magnetic panel

Note : Dimensions may vary slightly depending on the model and design chosen.

Side art ACDC

90,00150,00

Easy to install :

For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.

For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.

to protect the sides when you lift the tray, we recommend this product : 

 

Package content :

  • 1 x Side Art Pinball Machine in Plexiglas, vinyl or mirror

Note : Dimensions may vary slightly depending on the model and design chosen.

Side art Addams Family

90,00150,00

Easy to install :

For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.

For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.

to protect the sides when you lift the tray, we recommend this product : 

 

Package content :

  • 1 x Side Art Pinball Machine in Plexiglas, vinyl or mirror

Note : Dimensions may vary slightly depending on the model and design chosen.

Out of stock

Side art Addams Family V2

90,00150,00

Easy to install :

For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.

For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.

to protect the sides when you lift the tray, we recommend this product : 

 

Package content :

  • 1 x Side Art Pinball Machine in Plexiglas, vinyl or mirror

Note : Dimensions may vary slightly depending on the model and design chosen.

Side art Aerosmith

90,00150,00

Easy to install :

For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.

For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.

to protect the sides when you lift the tray, we recommend this product : 

 

Package content :

  • 1 x Side Art Pinball Machine in Plexiglas, vinyl or mirror

Note : Dimensions may vary slightly depending on the model and design chosen.

Side art Alien

90,00150,00

Easy to install :

For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.

For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.

to protect the sides when you lift the tray, we recommend this product : 

 

Package content :

  • 1 x Side Art Pinball Machine in Plexiglas, vinyl or mirror

Note : Dimensions may vary slightly depending on the model and design chosen.

Side art Attack from mars

90,00150,00

Easy to install :

For Plexiglas or mirror sides: Place the pinball machine on the metal arms and remove the hinge screw. Place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass. Glue in place. Use a light to locate the screw hole on the other side. Drill with a 10 mm wood bit and replace the screw.

For the vinyl version, place the flipper on the metal arms and remove the hinge screw. You’ll need to lightly sand the installation surface, clean it well and then place the side from the bottom, leaving a 1 mm gap to avoid contact with the glass and hammer in the sides. Use a light to locate the screw hole on the other side, then cut with a cutter and replace the screw.

to protect the sides when you lift the tray, we recommend this product : 

 

Package content :

  • 1 x Side Art Pinball Machine in Plexiglas, vinyl or mirror

Note : Dimensions may vary slightly depending on the model and design chosen.