Side art Terminator 2 Judgment day
Select options This product has multiple variants. The options may be chosen on the product page

Side art Terminator 2 Judgment day

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Terminator 2 Judgment day chrome
Select options This product has multiple variants. The options may be chosen on the product page

Side art Terminator 2 Judgment day chrome

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Terminator 2 rise of the machines
Select options This product has multiple variants. The options may be chosen on the product page

Side art Terminator 2 rise of the machines

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art The Big Lebowski
Select options This product has multiple variants. The options may be chosen on the product page

Side art The Big Lebowski

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art The Big Lebowski V2
Select options This product has multiple variants. The options may be chosen on the product page

Side art The Big Lebowski V2

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art The Flintstones
Select options This product has multiple variants. The options may be chosen on the product page

Side art The Flintstones

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art The Flintstones V2
Select options This product has multiple variants. The options may be chosen on the product page

Side art The Flintstones V2

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art The Flintstones V3
Select options This product has multiple variants. The options may be chosen on the product page

Side art The Flintstones V3

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art The Godfather 50 years
Select options This product has multiple variants. The options may be chosen on the product page

Side art The Godfather 50 years

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art The machine bride of pinbot
Select options This product has multiple variants. The options may be chosen on the product page

Side art The machine bride of pinbot

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art The machine bride of pinbot V2
Select options This product has multiple variants. The options may be chosen on the product page

Side art The machine bride of pinbot V2

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art The Munsters
Select options This product has multiple variants. The options may be chosen on the product page

Side art The Munsters

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art The Shadow V2
Select options This product has multiple variants. The options may be chosen on the product page

Side art The Shadow V2

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art The Simpsons
Select options This product has multiple variants. The options may be chosen on the product page

Side art The Simpsons

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art The walking dead
Select options This product has multiple variants. The options may be chosen on the product page

Side art The walking dead

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art The Who’s Tommy
Select options This product has multiple variants. The options may be chosen on the product page

Side art The Who’s Tommy

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.