Side art Star Trek (Stern)
Select options This product has multiple variants. The options may be chosen on the product page

Side art Star Trek (Stern)

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Star wars
Select options This product has multiple variants. The options may be chosen on the product page

Side art Star wars

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Star wars comics
Select options This product has multiple variants. The options may be chosen on the product page

Side art Star wars comics

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Star Wars Episode 1
Select options This product has multiple variants. The options may be chosen on the product page

Side art Star Wars Episode 1

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Star wars V2
Select options This product has multiple variants. The options may be chosen on the product page

Side art Star wars V2

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Stargate
Select options This product has multiple variants. The options may be chosen on the product page

Side art Stargate

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Stranger Things
Select options This product has multiple variants. The options may be chosen on the product page

Side art Stranger Things

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Stranger Things V2
Select options This product has multiple variants. The options may be chosen on the product page

Side art Stranger Things V2

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Street Fighter 2
Select options This product has multiple variants. The options may be chosen on the product page

Side art Street Fighter 2

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Striker Xtreme
Select options This product has multiple variants. The options may be chosen on the product page

Side art Striker Xtreme

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Super Mario bros
Select options This product has multiple variants. The options may be chosen on the product page

Side art Super Mario bros

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Swords of fury
Select options This product has multiple variants. The options may be chosen on the product page

Side art Swords of fury

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Tales from the crypt
Select options This product has multiple variants. The options may be chosen on the product page

Side art Tales from the crypt

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Tales of the arabian nights
Select options This product has multiple variants. The options may be chosen on the product page

Side art Tales of the arabian nights

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Teed off
Select options This product has multiple variants. The options may be chosen on the product page

Side art Teed off

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Teenage mutant ninja Turtles
Select options This product has multiple variants. The options may be chosen on the product page

Side art Teenage mutant ninja Turtles

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.