Side art King Kong
Select options This product has multiple variants. The options may be chosen on the product page

Side art King Kong

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Kiss
Select options This product has multiple variants. The options may be chosen on the product page

Side art Kiss

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Kiss V2
Select options This product has multiple variants. The options may be chosen on the product page

Side art Kiss V2

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Last action hero
Select options This product has multiple variants. The options may be chosen on the product page

Side art Last action hero

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Led Zeppelin
Select options This product has multiple variants. The options may be chosen on the product page

Side art Led Zeppelin

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Lethal Weapon 3
Select options This product has multiple variants. The options may be chosen on the product page

Side art Lethal Weapon 3

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Lethal Weapon 3 v2
Select options This product has multiple variants. The options may be chosen on the product page

Side art Lethal Weapon 3 v2

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Lord of the rings
Select options This product has multiple variants. The options may be chosen on the product page

Side art Lord of the rings

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Mandalorian
Select options This product has multiple variants. The options may be chosen on the product page

Side art Mandalorian

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Medieval Madness V2
Select options This product has multiple variants. The options may be chosen on the product page

Side art Medieval Madness V2

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Metallica
Select options This product has multiple variants. The options may be chosen on the product page

Side art Metallica

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Metallica remastered
Select options This product has multiple variants. The options may be chosen on the product page

Side art Metallica remastered

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Monopoly
Select options This product has multiple variants. The options may be chosen on the product page

Side art Monopoly

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Monster bash
Select options This product has multiple variants. The options may be chosen on the product page

Side art Monster bash

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art Mustang
Select options This product has multiple variants. The options may be chosen on the product page

Side art Mustang

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.

Side art NBA Fastbreak
Select options This product has multiple variants. The options may be chosen on the product page

Side art NBA Fastbreak

Price range: 90,00€ through 150,00€

Give your pinball machine a unique touch with these side arts in plexiglass or vinyl, designed for precise installation and a flawless finish.

Easy Installation:

  • Plexiglass Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    3. Secure it in place.
    4. Use a light to locate the screw hole on the other side, drill with a 10 mm wood bit, then reinsert the screw.

  • Vinyl Version:

    1. Place the pinball machine on its metal arms and remove the hinge screw.
    2. Lightly sand the surface where it will be applied and clean thoroughly.
    3. Position the side art from the back, leaving a 1 mm gap to prevent contact with the glass.
    4. Smooth it out to ensure strong adhesion.
    5. Use a light to locate the screw hole on the other side, cut with a utility knife, then reinsert the screw.

👉 Recommended Protection: To prevent wear when lifting the playfield, we recommend this product: Pinball Assembly Blades.

Package Contents:

1 x Pinball Side Art in Plexiglass or Vinyl (depending on selected model).

Note: Dimensions may slightly vary depending on the selected model and design.